Wood cold air return covers

Dampers available for Standard Sizes. NOTE: Larger Sizes and Alternate Wood Species available upon request.

Wall Mounted Cold Air Return: Measure width (horizontal), and height (vertical) of opening in wall or ceiling. Lip on unit will extend approximately 1" beyond opening around perimeter of return. 18 Standard wood species available, and sizes from 10 wide x 6 high.

Note: Alternate Wood Species Available upon request.

Tapered Base Vent: Width - Measure opening in baseboard, must be longer than the duct work opening. Height - Measure the vertical opening up the wall, the vent must be higher than this measurement. 18 standard wood species available.

NOTE: Larger Sizes and Alternate Wood Species available upon request.

Standard Widths: 15", 18", 24". Height - Measure vertical distance up the wall, must be higher than duct work opening. Standard Height: 4-7/16. Depth - Distance that the Grate extends onto floor from the wall. Standard depth: 2-7/8". Dampers available for Standard Sizes.

Base Cold Air Return Grille: This model is used to replace the unsightly stamped metal returns commonly incorporated into the baseboard. 18 standard wood species available.

Width: Measure the opening in the baseboard, must be wider than the ductwork opening in the wall. Standard Widths: 15", 18", 21" 24" and 32"

Height Measure the vertical distance up the wall. Must be higher than the ductwork opening. Standard Heights: 7-1/4" & 9-1/4"